(306) 366-2184 sales@michels.ca

Select / Maximizer

Wireless Remote Operated Systems
Michel's Industries » Products » Side Roll Tarp Systems- Manual & Electric » Select/Maximizer/Electric???
Select-width
Select
The “Original” Side-Rolling tarpaulin system with precise fit
Maximizer-width
maximizer
Incorporates added width to the fabric to accommodate heaped loads

Order Forms

Parts

Manuals /Instructions

Brochures

Video

Features on Both the Select and Maximizer Side-Roll Systems

Select-Farm-front-tension
On both of these models, proven tension control using extension springs is incorporated along with bevelled pulleys on both ends to apply constant and uniform pressure. This “Hold-Back” device keeps the tarp rolling evenly during operation.
Select-Removeable-Hoods-
Farm models consist of a removable rear hood/end cap that enables the full function of the tailgate.
Select-no-Straps
A fiberglass ridge poll, sewn into a pocket on the fabric, is used to support the fabric between the cross-members.This procedure is optional for semi trailer units. some trailers have their own rod running down the centre of the trailer.
Select-crank-placement
Semi trailer units have the option of a front or rear crank that can be either short(2’6″) or long (8′). The crank length is adjustable to suit your trailer or operator.
Select-Std_-tarp-stop
Bolt on style tarp stops are standard on all Side-Rolling tarpaulin Systems.
Select-Flip-Release-e1602045630459
Optional “Flip Release” tarp stops are offered for all side-rolling tarp systems. These “Flip Release” tarp stops are available with a 3″ or 6″ offset which allows clearance of the box or trailer.

Electric Units

Electric Units are available for both the Select and Maximize tarp systems. These electric units consist of a sealed 12V electric motor with a cover to prevent exposure to harmful elements. This motor is attached to an aluminum pivot arm that is mounted on the front of your truck box. This pivot arm holds the motor stationary so that just the motor shaft turns the roll tube to open and close your tarp system. This electric unit can be operated by using a rocker switch, mounted inside your cab or with an optional 200 Series Integrated Wireless Remote which will operate all Michel’s 200 Series Chute Openers, Convey Hawk, Convey Hawk II, Hopper Augers and Side Roll tarp systems as well as Lights and Swing Augers.

Select-wireless
Select-Motor
received

Rear Mounted Electrically Operated System

This rear mounted system can be used if there is not enough space between the cab and the box. For the front mount system 3″ is required for the pivot arm and 8″ for the motor if box walls are not high enough. The rear mount arm folds out of the way when in either the open position or the closed position. This allows for full operation of the end-gate.
SideRoll_rear_mount_electric_2
SideRoll_rear_mount_electric_1
SideRoll_rear_mount_electric_3

Optional Quick Disconnect for Electric Units on semi trailers

Easily convert from electric to manual operation. Remove quick pin, disengage hex and re-insert quick pin. Manual crank can then be installed on the spline using the supplied quick pin.
Quick-Disconnect-engaged

Motor engaged

Quick-Disconnect-not-engaged

Motor disengaged to operate crank

Standard Features

20 ounce PVC fabric
Reinforced fabric on front, rear and sides to extend fabric life

OPTIONS

18 colors to choose from
3″ or 6″ offset Flip Release tarp stops
Reinforcements over hoops/cross members
22 ounce PVC fabric
Wireless Remote operated (200 Series)
Quick Disconnect for Electric Units

Available Colours

colors